86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


hongkong Hong Ye Jie Technology Co., Ltd.

Products >> Silicone Rubber For Tyre Molding 

Silicone Rubber For Tyre Molding 

Build Your Online Product Catalogs?



Description
Product Name: Silicone Rubber For Tyre Molding 
Supply Ability: 200kg
Related proudcts liquid silicone, mould making silicon,
Specifications 25KG/DRUM 200KG/DRUM
Price Term: fob
Port of loading: shenzhen
Minimum Order 200kg
Unit Price: 10-14usd per kg

Description

HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
HY-E620 Silicone Rubber is has been used for years to make tire pattern molds .
Characteristics
low shrinkage (less than 0.1% )
high tensile and tear strength with high copy times
easy for operation (mixing ratio at 1:1 /10:1)
very good flow and easy for pouring operation
Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat


Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(***ergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Any questions of Silicone Rubber For Tyre Molding , please feel free to contact ms yif :
TEL: 086-755-89948019
FAX: 086-755-89948030
MOBILE:086-15979907468
Website: www(dot)szrl(dot)net
E-MAIL: guyihuide(at)gmail(dot)com

Contact Us
Company: hongkong Hong Ye Jie Technology Co., Ltd.
Contact: Ms. yif gu
Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong, China
Postcode: 518117
Tel: 8675589948019
Fax: 86075589948030
E-mail:         


Copyright© hongkong Hong Ye Jie Technology Co., Ltd. All Rights Reserved.
Tel : 8675589948019 Fax : 86075589948030
Powered by 86exporter.com